General Specifications
-
Size: 21.70 × 48.41 × 89.04 mm
-
Battery capacity: 1000 mAh
-
Current: 3A discharging
-
Battery cell working voltage range: 3.2–4.2V
-
Output voltage: Stepless pressure regulation 1.8V–4.2V
-
Static current: < 10 μA
-
Charging port: Type-C
-
Load range: ≥ 0.8 Ω
-
Screen type: Digital tube screen
-
Shell material: Plastic shell + silicone cigarette butt
-
Atomizer range: Ø 14 × 51 mm / Ø 12 × 62 mm
-
Weight: —
Operating Parameters
-
Switch on/off:
Press button 5 times to power on/off.-
Ambient light + blue light stay on when powered.
-
Screen display: Gradual light-up when powering on, 2s shutdown fade-out.
-
-
Connecting:
When atomizer is connected in standby: gear lights up for 1s, wakes screen.- No atomizer → light stays off.
-
Preheat:
Double press within 1.5s to start warm-up.-
Preheats 8s at 1.8V constant pressure.
-
Screen shows circular progress bar animation + power/mouth count updates.
-
-
Smoke (use):
Both head and button smoking supported.-
Atmosphere + breathing lights flash when inhaling.
-
Middle globe lights up (UI display).
-
Lights up in 6s increments.
-
Records number of puffs each time.
-
-
Change voltage:
Click button = +0.1V per press.-
Long press = rapid adjustment.
-
Max = 4.2V (auto reset to 1.8V after release).
-
Ambient light changes from yellow → red as voltage increases.
-
Range: 1.8V–4.2V.
-
-
Power display:
Screen shows percentage of power. -
Mouth count record:
Device records number of puffs.
Charging Parameters
-
Low voltage:
<3.2V → red light flashes 10 times, enters standby.- Screen: Lightning symbol flashes white, red light flashes with “lightning breath.”
-
USB charging current:
5V / 0.5A with overvoltage protection.-
No smoking/operation during charging.
-
Fast charging not supported.
-
-
Charging display:
-
Green light = charging.
-
Full green = fully charged.
-
Screen shows % with lightning symbol + progress grids.
-
Remains lit during charging, dims after 10s to prevent glare.
-
Restores brightness when interacting.
-
-
Charging time: ~115 minutes
-
Charging high-voltage protection:
5V/0.5A = normal.
7V–28V = triggers protection, charging cut off.- Screen shows no additional prompt.
Protection Features
-
Smoking timeout: >10s puff → red light flashes 4 times, standby.
-
Gear memory: Saves last voltage setting.
-
Overload protection: PCBA with overvoltage protection.
-
Short circuit: Red light flashes 3 times, output cut off.
- Screen shows no prompt.
-
No load: White light flashes 3 times, standby.
- Screen shows no prompt.
-
Overcurrent protection: If resistance < 0.8 Ω → red light flashes 3 times, standby.